3 WING CUTTER STRAIGHT

Spindle
cutter – Straight/Slot/Rabbet 3/4′

Tungsten Carbide – 3 wing

The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4′ or 1/2′ spindle shaft.

The cutter can be configured to cut grooves/slots and rebates.

KP800020 – 3/4′ – 1/2′ spacer rings

Important:

• Make sure the spindle moulder has a table opening of at least Ø
  140mm.
• Designed for spindle moulders equipped with either a 1/2′ or 3/4′
  spindle shaft.