COLLET 1.6MM FOR TCMT001 MINITOOL

R31.30
Flexible shaft for TCMT001 rotary tool Collet diameter: Ø1.6mm Application: The collet is measured on the inside. There are three

COLLET 2.3MM FOR TCMT001 MINITOOL

R31.50
Flexible shaft for TCMT001 rotary tool Collet diameter: Ø2.3mm Application: The collet is measured on the inside. There are three

COLLET 3.2MM FOR TCMT001 MINITOOL

R31.30
Flexible shaft for TCMT001 rotary tool Collet diameter: Ø3.2mm Application: The collet is measured on the inside. There are three

COLLET SET 4PC + NUT

R179.40
Collet set for thread 9/32 x 40 The collet set is used to hold the corresponding shank diameter. Collets included

COLLET SET 4PC + NUT

R179.40
Collet set for thread 9/32 x 40 The collet set is used to hold the corresponding shank diameter. Collets included

COLLET SET 5PC + COLLET NUT

R209.80
Collet set for thread 8 x 0.75 The collet set is used to hold the corresponding shank diameter. Collets included

COLLET SET 5PC + COLLET NUT

R209.80
Collet set for thread 8 x 0.75 The collet set is used to hold the corresponding shank diameter. Collets included

DRILL CHUCK 0-3.2MM FOR TCMT001

R127.85
Chuck for TCMT001 rotary tool Application: The chuck is used to replace the collet clamping system of the TCMT001 rotary

KEYLESS CHUCK 0.4 – 3.2MM DREMEL

R391.60
Keyless chuck for thread 9/32 x 40 The keyless chuck is used to hold accessories with a shank diameter between

KEYLESS CHUCK 0.4 – 3.2MM DREMEL

R391.60
Keyless chuck for thread 9/32 x 40 The keyless chuck is used to hold accessories with a shank diameter between

KEYLESS CHUCK 0.4-3.2MM.TREAD 8X0.75

R376.30
Keyless chuck for thread 8 x 0.75 The keyless chuck is used to hold accessories with a shank diameter between

KEYLESS CHUCK 0.4-3.2MM.TREAD 8X0.75

R376.30
Keyless chuck for thread 8 x 0.75 The keyless chuck is used to hold accessories with a shank diameter between

MINI COLLET WRENCH

R10.45
Collet wrench The collet wrench is used to securely tighten the collet nut or multi chuck, locking the mini rotary

MINI MULTI COLLET NUT FOR 0.8-3.2MM SHANK

R85.80
Multi chuck – Ø 0.8mm – 3.2mm The multi chuck is ideal for mini and micro drill bits, to secure

MINI QUICK CHANGE COLLET KIT 0.8/1.6/2.4/3.2MM

R67.60
Quick change collet kit The quick change collet allows you to fit the following collet diameters: Ø 0.8mm Ø 1.6mm

MINI REPLACEMENT COLLET 0.8MM

R20.85
Replacement collet – Ø 0.8mm The collet is used to hold mini rotary accessories with a shank diameter of Ø