HINGE BORE BIT 35MM X 92MM 3/8′ SHANK
R654.25
Description
Special Hinge Boring Bit

Carbide Tipped
These bits are designed to drill flat bottom blind holes for European style hinges. Flat bottom boring bits are also used for drilling large diameter thru-holes without the plug that is typical when using a hole saw. These thru-hole bits are used for locks, door knobs, wiring holes, etc. Flat bottom boring bits on our site are designed for use in wood or plastics and are not intended for use in steel. For best effect, use with a drill press if at all possible. You can accurately set the depth of cut and keep it perpendicular to the panel.

Additional information
| Weight | 0.22 kg |
|---|---|
| Dimensions | 44 × 38 × 38 mm |
Shipping & Delivery
Related products
3 WING CUTTER 1/8′ & 3/8′ QUARTER ROUND 1/4′ BEAD
R903.30
COVE BIT 1 3/8′ X 5/8′ TCT 1/4′ SHANK
R513.95
REDUCING COLLET 1/2′ – 1/4′ FOR ROUTER BITS
R95.25
STRAIGHT BIT 1/8′ (3.2MM) X 1/2′ CUT SOLID CARBIDE 2 FLUTE 1/4’SHANK
R320.25
STRAIGHT BIT 3/16′ (4.8MM) X 5/8′ CUT SOLID CARBIDE 2 FLUTE 1/4’SHANK
R400.95
